HighPoint RocketStor Manager Software (WebGUI&CLI) for Windows
Copyright (C) 2018 HighPoint Technologies, Inc. All rights reserved.

Last updated on Dec 20, 2018

This file is divided into the following major sections:

1. Software Version
2. Files Listing
3. System Requirements
4. Installing the Software Package
5. Running the Management Software
6. Rivision History

1. Software Version
====================

    Manager version: v2.14.0

    Operating Systems:
        Windows 10
       	Windows 2016
	
	Support Product list:
        RocketStor 6618A
        RocketStor 6628A
        RocketStor 6618T
        RocketStor 6628T
        RocketStor 6318A
        RocketStor 6314A
        RocketStor 6674T
        RocketStor 6418AS
        RocketStor 6414AS
        RocketStor 6418TS
        RocketStor 6414TS
        RocketStor 6414VS
        RocketStor 6422AS
        RocketStor 6421AS
        RocketStor 6424TS
        RocketStor 6422TS
        RocketStor 6421TS
        RocketStor 6421VS
        RocketStor 6114V
        RocketStor 6124V

2. Files Listing
------------------
   README.txt                        This file
   HPT_CLI_Guide.pdf                 CLI User Manual
   HighPoint RocketStor Manager.exe  Installation package file

3. System Requirements
------------------------

   The software package must be installed on system with supported HighPoint
   RocketStor installed, and the device driver must be loaded to run
   the service.
   
   A web browser with XML support is required on the client side, e.g. Internet
   Explorer 6.0, Mozilla or FireFox.


4. Installing the Software Package
------------------------------------

   To install the packge, run "HighPoint RocketStor Manager.exe".
   
5. Running the Management Software
------------------------------------

   a. Run WebGUI
       To run the WebGUI, start your browser and enter the following URL address:
   
          http://localhost:7404
       
       If you are accessing WebGUI on a remote system please change "localhost"
       to the server address.
 
       If you can't connect to a remote HPT WebGUI, check if hptsvr is running on that
       system and you can access the remote system via TCP/IP connection. If you
       have firewall configured, make sure TCP port 7404 is not blocked.

   b. Run CLI
       To run CLI, in the start menu under the folder "HighPoint RocketStor Manager", 
       click "HighPoint RocketStor Command Line". Or start your cmd terminal and input the command:
                hptraidconf 
       
       And you can enter a complete command with parameters at the cmd prompt and receive
       one output result on the screen at a time.
                hptraidconf -u {username} -p {password} {command}
       Example:
                #hptraidconf -u RAID -p hpt query controllers 

   c. Run Notification
       To run CLI, in the start menu under the folder "HighPoint RocketStor Manager", 
       click "HighPoint RocketStor Notification". Or start your cmd terminal and input the command:
                rstray.exe 
   
6. Revision History
---------------------

   v2.14.0 11/13/2018
    * Hot plugged Critical RAID with offline member disk is not reported to OS by default (Driver needs to support this feature).
      The critical RAID can be changed to Online by click OnLine button in WebGUI.  
      The option can be turn off in WebGUI setting page (which is called  "Report Critical RAID to OS").
   
   v2.13.0 08/04/2018
     * Set standby timer to 10 minutes default for RS6114V/RS6124V.
	 
   v2.12.9 04/12/2018
     * Support RS6124V.
	 
   v2.12.8 11/05/2017
     * Support spin down idle disk.
	 * Collect driver version.

   v2.12.7 08/24/2017
     * Support RS6628A/RS6628T.
	 
   v2.12.6 06/22/2017
     * Support all RockStor product.
	 
   v2.12.3 05/22/2017
     * Support RockStor 6114V.